Tuesday, October 28, 2014

CT Tags for "Autumn Fantasy" by Mary's Designs

"Autumn Fantasy" by Mary's Designs available at Sensibility Scrapping, Low Budget Scrapping,  Sweet-Pinup and Render Art World.


This fall fantasy kit comes with 73 Elements, 11 papers/backgrounds, 10 frames, and 2 word art. It is perfect for your magical autumn tags.

For my first tag with this autumnal kit I paired it with "Cicely" by Designs by Norella

For my second tag, I paired it with "Autumns Witch"  by Brooke Gillette.



Saturday, October 25, 2014

CT Tags featuring "Giselle" by Designs by Norella

"Giselle" by Designs by Norella available here.


Meet the lovely new fairy "Giselle" by Designs by Norella.
This beautiful fairy comes completes with 3 additional layers 
to change the color palette.


My first tag with this beauty I used "Fairy Princess" by Kizzed by Kelz

For my second tag, I paired her up with "On Dragonfly Wings" by Amy Marie's Kits.

Come check out Giselle and all the other beautiful work at

Friday, October 24, 2014

CT Tutorial for "Brielle 1" by English Rose Designs




**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Brielle 1” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

PTU Kit - “Hippie Love” by Abstract Creations.  Available for purchase at Abstract Creations store.

FTU Mask - "Mask 12 - Flash" by Aeval Amore.  Available for download on my blog, Aeval's Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 2 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Add Element 40 to the canvas and resize to fit the width of the canvas.  Position at the top of the canvas and add DS.

Add Element 31 to the canvas and resize to about ¾ the width of the canvas.  Position close to the right side of the tag. Add DS.

Add Paper 3 to the canvas.  Resize to fit over the opening in the frame in the element above.  Move the paper layer below the frame.  Use the eraser tool to erase any overhang of the paper showing outside of the frame.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the top half of the poser.  Copy (Ctrl + C) the poser and switch back to the working canvas.  Paste (Ctrl + V) the poser onto the canvas.   Position the poser in the frame to your liking. If there is overhang of the poser off the paper you can right click on the poser layer and select “Create clipping mask” this will hide any of the poser outside of the shape of the paper.

Add Element 22 to the canvas.  Resize to fit the width of the frame.  Position at the bottom of the canvas so it overlaps the frame.  Add DS.

Add the full poser to the canvas.  Resize to fit and position to the left of the canvas.  Add DS. 

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the groovy elements from the kit.  Resize the elements as you add them so fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.
  • Element 24
  • Element 15
  • Element 35 (x3)
  • Element 29 (x2)
  • Element 13
  • Element 2
  • Element 25
  • Element 20
  • Element 30

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Thursday, October 16, 2014

CT Tutorial for Permelia and The Soul Keeper

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Permelia” by Designs By Norella.  You can purchase the tube at the Designs by Norella store

PTU Kit - “The Soul Keeper” by MarieL-Designs.  Available at Scrappin Dollars and Scraps & Co.

FTU Mask - "Mask 07 - Torn" by Aeval Amore.  Available for download on my blog, Aeval's Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 14 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Add Element 47 to the canvas.  Resize to fit the width of the canvas and position in the center.  Add DS

Add Element 6 to the canvas. Resize to fit the width of the canvas and position at the bottom of the canvas.  Add DS.

Add Frame 2 to the canvas.  Resize to about ¾ the width of the canvas and position in the center.  Add DS.

Add Paper 15 to the canvas.  Resize to fit over the opening in the frame.  Move the paper layer below the frame.  Use the eraser tool to erase any overhang of the paper showing outside of the frame.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the head of the poser.  Copy the poser and switch back to the working canvas.  Paste the poser onto the canvas. Make sure the poser is above the paper and below the frame.  Resize the head to fit in the frame the way you want it displayed and then right click on the layer and select “Create Clipping Mask”.  This will hide any part of the head not on top of the paper below it.  Add DS.

Add the full poser to the canvas.  Resize to fit the canvas and position on the left side of the canvas.  Add DS.

Add Element 1 to the canvas.  Resize to your liking and position in front of the full length poser at the bottom.  Add DS.

Add Element 3 to the canvas.  Position in the center of the canvas at the bottom.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the dark elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element 46
  • Element 29
  • Element 33
  • Element 20
  • Element 16
  • Element 17
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Wednesday, October 15, 2014

CT Tutorial for Nightborne and The Soul Keeper plus Bonus FB Cover

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Nightborne” by English Rose Designs.  You can purchase this Halloween cutie at her store, English Rose Designs.

PTU Kit - “The Soul Keeper” by MarieL-Designs.  Available at Scrappin Dollars ,  and Scraps & Co.

FTU Mask - "Mask 06 – Fireball” by Aeval Amore.  Available on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 6 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize so that the width is a little more than half the width of the canvas.   Position on the right hand side at the top.  Right click on the layer and select “Duplicate Layer” and click OK.  Move the duplicated layer to the left side of the canvas.  The two masks should overlap.

Add Element 68 to the canvas.  Resize to fit the width of the canvas and position at the top of the tag.  Duplicate this layer as well.  Using the Menu Bar select Edit > Transform > Flip Horizontal to flip the element horizontally.  This will create a bit more coverage at the bottom of the tag.

Add Element 20 to the canvas.  Resize to your liking and position on the left hand side above the road.  The element should fill the area from the road to the top of the canvas on the left side.  Add DS.

Add Element 55 to the canvas.  Resize to fit the width of the canvas.  Position in front of the previous element so the moon shows above the scary house.  Add DS.

Add Element 62 to the canvas.  Resize to fit the width of the canvas.  Position in the center of the canvas.  Change the Opacity of the layer to 81%.  Duplicate the layer and move the duplicated layer above the original one to fill in the gap at the top.  The two layers will overlap.

Add Element 58 to the canvas.  Resize to fit the width of the canvas.  Position on the road in front of everything else.  Leave about ¼ of the canvas showing at the bottom as a floor.  Add DS.

Add the full poser to the canvas.  Resize to fit the canvas and position on the left side of the canvas.  Add DS. 

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the dark elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element 66
  • Element 67
  • Element 74
  • Element 99
  • Element 21
  • Element 32
  • Element 1
  • Element 3
  • Element 13
  • Element 16
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!


Monday, October 13, 2014

CT Tutorial for "Blossom" and "Fashion Girl"


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Blossom” by Designs By Norella.  You can purchase the tube at the Designs by Norella store

PTU Kit - “Fashion Girl” by MarieL-Designs.  Available at Scrappin Dollars , Bubble’s Dream, Sweet PinUp, and Scraps & Co.

FTU Mask - "Mask 05 - Dreamscape" by Aeval Amore.  Available for download on my blog, Aeval's Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 2 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.   Right click on the layer and select “Blending Options”, Turn on Outer Glow at default settings and click ok.

Add Frame 2 to the canvas.  Resize to fit about ¾ of the canvas and position in the center.  Add DS.

Add Paper 2 to the canvas.  Resize to fit over the opening in the frame.  Move the paper layer below the frame.  Use the eraser tool to erase any overhang of the paper showing outside of the frame.

Open the poser in another canvas. Use the marquee tool and draw a rectangle around the top half of the poser.  Copy (Ctrl + C) the poser and switch back to the working canvas.  Select the frame layer and paste (Ctrl + V) the poser onto the canvas.  Resize the poser to display to your liking and position in the center of the Frame.  Once the poser is displayed to your liking, right click on the poser layer and select “Create Clipping Mask” this will hide any of the poser that is outside of the paper under it.  Right click on the poser layer again and select “Blending Options” change the Blend mode to “Hard Light” and click OK.

Add the full poser to the canvas.  Resize to fit the canvas and position on the right side of the canvas.  Add DS. 

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element 20
  • Element 48 (x2)
  • Element 81
  • Element 16
  • Element 38
  • Element 46
  • Element 10
  • Element 52
  • Element 59
  • Element 33
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Saturday, October 11, 2014

CT Tutorial for PTU Kit "Chief Soaring Eagle" by Marys Designs


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
Poser is included in the kit.

PTU Kit – “Chief Soaring Eagle” by Marys Designs.  You can find this beautiful earthy kit for sale at Sensibility Scrapping, Low Budget Scrapping, and Sweet-Pinup.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add Background 1 to the canvas.  Resize to fit the canvas.

Add Element 20 to the canvas.  Resize to your liking and position in the center of the background slightly off-center on the left side.

Add Element 19 to the canvas.  Resize to your liking.  Position in front of the other horse.  Add DS.

Add Element 17 to the canvas.  Resize so that the element is about half the width of the canvas.  Position on the left side of the canvas. Add DS.

Add your poser to the canvas. Resize to fit the canvas.  Position her to the right of the canvas in front of the skins.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used.  

Here are all the additional elements I used from the bottom layers up:
  • Element 58
  • Element 40
  • Element 5
  • Element 10
  • Element 9 (x6)
  • Element 11
To finish the look, use the rectangular marquee tool and draw a rectangle around the entire canvas.  Then from the menu select Select  > Modify > Border and set the border width to 15.  Add a new layer on top of all the layers and then use the paint bucket tool and the style of your choice to create a border.

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Wednesday, October 8, 2014

CT Tutorial featuring "Lenox" and matching kit "Fashion Girl"


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Lenox” by Designs By Norella.  You can purchase the tube at the Designs by Norella store

PTU Kit - “Fashion Girl” by MarieL-Designs.  Available at Scrappin Dollars , Bubble’s Dream, Sweet PinUp, and Scraps & Co.

FTU Mask - "Mask 13 - Cloudy” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

FTU Mask – “Mask 18 – Kisses” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 12 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Open Paper 8 in a new canvas. .  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Add the new paper/mask combination to the working canvas.  Resize to fit over the first mask layer.  Add DS to make the kisses stand out more on the paper.

Add Paper 10 to the canvas.  Resize to fit the entire canvas.  Use the Rectangular Marquee Tool to select a section of the bottom of the tag.  Inverse the selection (Shift+Ctrl+I). Right click on the layer and select Rasterize Layer.  Press the delete key to delete the paper from that section.  You now have a floor.  Use a soft round brush and the eraser tool to erase around the edges to give it a softer finish.

Add Element 78 to the canvas and position in the center of the top section.  Resize to about 300 px wide.

Add Element 87 to the canvas in bottom left corner.  Resize to your liking.  Add DS.

Add the full poser to the canvas.  Resize to fit the canvas and position so it looks like she is standing in front of the pillows.  Add DS. 

Add Element 11 to the canvas.  Resize to about 425 px wide.  Position in the center of the tag over the blue element we added at the beginning.  Right click on the layer and select “Blending Options”.  Turn on Bevel & Emboss, set the style to Outer Bevel and technique to Smooth.  Turn on Stroke, set the size to 1 and change the Color to a very light purple.  Turn on Outer Glow and change the color to a soft pink.  Turn on DS with the settings at the beginning.  Click OK.

Add Element 85 to the canvas.  Resize so the phone screen will be large enough to hold the name you want to put on the tag.  Use Edit > Free Transform to slightly rotate it so it looks like it is leaning on the leg of the poser.  Add DS.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the upper portion of the poser.  Copy (Ctrl + C) the poser upper half and switch back to the working canvas.  Paste (Ctrl + V) the poser onto the canvas.  Resize to fit in the right side of the tag. Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element 70 (x4)
  • Element 64
  • Element 84
  • Element 44
  • Element 19 (x2)
  • Element 12
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Mask 18 - Kisses


My newest mask filled with lipstick kisses!  I used a kiss brush to make this one for a a new tag.
Enjoy!


Tuesday, October 7, 2014

CT Tutorial for Monsterina 1 and Halloween Dolls


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Monsterina 1” by English Rose Designs.  You can purchase this Halloween cutie at her store, English Rose Designs.

PTU Kit - “Halloween Dolls” by Ginnibug Designz.  Available for purchase at PicsForDesign.

FTU Mask - "Mask 11 - Blurry” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper hdp3 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.  Right click on the layer and select “Blending options” turn on DS and IS (Inner Shadow).

Add Element hd64 to the canvas.  Resize to fit most the width of the canvas and position at the bottom.  Add DS.

Add Element hdm to the canvas.  Resize to fit the width of the tag.  Position so it slightly overlaps the road.  Add DS.

Add Element hd10 to the canvas.  Resize to your liking and position in the center of backdrop.  Add DS.

Add Element hd36 to the canvas.  Resize to fit the width of the canvas.  Position the fence so it meets up with the road and is in front of the scarecrow.  Add DS.

Add Element hd50 to the canvas.  Resize to about half the width of the canvas.  Position at the top in the upper right corner.  Add DS.  Right click on the layer and select “Duplicate layer”.  Move the duplicated layer to line up with the end of the first so it reaches from the end of the original element to the upper left corner.

Add Element hd55 to the canvas.  Resize to your liking and position in front of the fence on the left side of the canvas.  Add DS.

Add Element hd18 to the canvas.  Resize to your liking and position in the upper left corner.  Add DS.

Add Paper hdp1 to the canvas.  Resize to fit over the opening in the frame.  Move the paper layer below the frame.  Use the eraser tool to erase any overhang of the paper showing outside of the frame.

Open the poser in another canvas. Use the marquee tool and draw a rectangle around the top half of the poser.  Copy (Ctrl + C) the poser and switch back to the working canvas.  Select the frame layer and paste (Ctrl + V) the poser onto the canvas.  Resize the poser to display to your liking and position in the center of the Frame.  Erase any part you don’t want to show using the eraser tool.  Add DS.

Add the poser to the canvas as the top layer.  Resize to fit on the canvas and position to the right of the canvas to look as though she is standing on the road.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the fun Halloween elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element hd5 (x2)
  • Element hd4 (x2)
  • Element hd1
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Sunday, October 5, 2014

CT Tutorial for Asha and Nadia

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Posers – “Asha”  and “Nadia” by Designs By Norella.  You can purchase the tubes at the Designs by Norella store

PTU Megakit - “October Girls” by Amy Marie.  This and all of Amy Marie’s other kits may be purchased at Amy Marie’s Kits.

FTU Mask - "Mask 17 – Hibiscus” by Aeval Amore.  Available for download on my blog, Aeval's Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 16 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Add CLUSTER#6 from Roseys 5pk Clusters included in the kit to the canvas.  Resize to fit the mask.  Add DS.

Open the psd file of Millie’s MPMOctoberGirls01 template included with the kit in a new canvas. 

Select all the layers except the watermark and background layers in the template and copy them over to the working canvas.  Position it in the center of the cluster. You should not need to resize it.

Next apply the layers and styles you want to all the layers of the template.  If you do not know how to combine the papers and elements, use this tutorial to learn how.

Here are the papers I clipped on each element or the type of style I applied:

1 – Paper 14
2 & 3 – Paper 19
4 – Paper 6
5 - Metallic style
6 – Paper 22
7, 8 & 9 – Paper 4

Above the paper layer clipped to template layer 3, add Element 67 to the canvas and resize to you liking.   Position on the left side of the canvas.  Add DS. Right click on the layer and select duplicate layer.  Use the action menu to flip the duplicate layer to face the opposite direction (Edit > Transform > Flip Horizontal).  Move the duplicate layer to the right side of the canvas.

Above the paper layer clipped to template layer 6, add Element 27 to the canvas.  Resize to your liking (make sure it is big enough to hold the name you want to put on the tag) and position in the center at the bottom on top of the Paper 22 layer.  Add DS.

Above all the template layers, add Element 179 to the canvas.  Resize to fit in the space at the top of the circle in the center.  Add DS.

Add your first poser and resize her to fit the canvas.  Position her on the left side of the tag.  Add DS.

Add you second poser and resize her to fit the canvas.  Position her on the right side of the tag.  Add DS.

Add FIGHT LIKE A GIRL GLOVES word art from Sarah’s word art included in the kit.  Resize to fit in the middle box.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

Element 149
Element 127
Element 191
Element 47
Element 116
Element 124
Element 150
Element 155
Element 189 (x2)
Element 183
Element 97 (x2)

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!


Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!